Pick and Place Machine GT-270
As GT-270 SMT Pick and Place Machine that is equipped with 8 heads as well as a new flying vision system, the GT-270 S realizes an optimum chip mounting speed of 32,000 CPH. In addition, it is applicable to 0201 chips to the largest 30mm ICs by default and increases actual productivity and placement quality by applying a smart nozzle checking and replacing the system.
| Model | GT-270 | |
| Number of Heads | Vision on the Fly | 8 |
| Placement Rate | Under the optimum condition
最优 |
32000CPH |
| IPC9850 | 26800CPH | |
| Feeder Capacity | Front and Back | 35 Tape Feeders
(8mm/12mm Electric Standard) 35+35 Tape Feeders (Optional) |
| IC Tray Capacity IC | 325 x 135mm | 2 |
| Component Alignment | Vision Detection | |
| Component Sizes | Handled by Head Camera
|
Smallest: 0201 (inch) |
| Largest: 13 x 10 (mm) | ||
| Handled by Fixed Bottom Camera | Smallest: 1206 (inch) | |
| Largest: 30 x 30 (mm) | ||
| Resolution | X/Y Axis XY | Magnetic Levitation Linear Motor |
| Z Axis Z | Step-Servo Motor | |
| Rotation | 0 to 360° | |
| Placement Accuracy | ±0.05mm | |
| X-Y Repeatability | Magnetic Grid | ±0.002mm |
| PCB Size | Maximum | L 500 x W 350mm |
| Minimum | L 50 x W 50mm | |
| In-line Conveyor | 3-section Transmit | |
| Programming | Vision Teach-in | |
| Coordinates Import | ||
| Main Control | Industrial PC | |
| Power | AC 220V ±10% (50/60Hz, 1 phase) | |
| Max. 3.0KW | ||
| Air Pressure | 0.55-0.7MPa (5.6-7.1kgf/cm2)
Built-in vacuum pump for nozzles |
|
| External Dimension(mm) 尺寸 | L x W x H | 1440*1600*1400MM |
| Mass | Approximate 1400kgs | |
Excellent Quality Hardware Support
| Ball Screws | KURODA / THK / NSK (Japan) |
| Linear Guide | HIWIN (Taiwan) |
| Magnetic Levitation Linear Motor Driver | Servotronix (Iraq) |
| Servo Motors & Drivers | PANASONIC (Japan) / MOONS (China) |
| Stepper Motors & Drivers | MOONS (China) |
| Cables & Tank Chain | IGUS (Germany) |
| Solenoid Value | CKD (Japan) / MAC (America) |
| IPC | Independent Research & Development |
| Attached 1: P&P Machine Standard Spare Parts List | ||
| No. | Specifications | Qty |
| 1 | Nozzles | 24 |
| 2 | Hexagon Wrench Tool | 1 |
| 3 | Material Rack | 1 |
